The mounting bracket is an installation accessory for universal crank operated outdoor/indoor roller shutters and sun shades. This product has been upgraded in details to make it much stronger. The pull ring is designed to be eight-shaped instead of round, to make the curtain rise and fall quickly, and not easy to shake.

The bracket can be installed horizontally or vertically, depending on the fixture to which the sun visper is to be installed. After determining the position of the mounting bracket, use the bracket as a template to mark the position of the holes in the surface pre-drilled holes to insert the plastic anchor.

If the bracket will be installed to solid wood, plastic anchor is not necessary. Plastic anchors are required for other media, such as concrete or stone. After drilling, insert the plastic anchor into the hole until it is level with the surface. Remove the four screws. Turn the clutch unit 90 degrees so that the clutch eye hangs from the top, the clutch eye hangs straight, and then turn the idle end unit so that the opening is facing away from the window.

The final step is to install bungee ropes and ring brackets strapped to the end of the shade. This is used to help tie the shade in windy weather. Mount the bracket in the side position. Make sure that each bracket is at least 6 feet from the top of the shade and can be reached by bungee rope.

The bracket is easy to install and replace, you can install and replace it according to the instruction. This set of cordless brackets includes 4 screws, 4 plastic anchors, and a pair of wireless brackets. If you encounter any usage issues, please contact us and we will provide you with a real service.

product information: